Most of our wall-mounted fireplaces go up in under half an hour with the mounting kit from the box. The planning takes longer than the drilling, so this guide covers what to decide before you start. The manual that comes with your fireplace has the final word on your model.
Pick the spot
Before you mark anything, sit where you usually sit and look at the wall. The flame should be easy to watch from there without tipping your head back.
Choose a well-ventilated room that's at least the size given in your manual, and keep the fireplace away from a door or a fan that would blow a draught across the flame.
Your manual gives the clear space the fireplace needs above it and on both sides. Measure it out on the wall before you drill, and keep anything that can catch fire outside that space.
Check the wall
Our wall-mounted fireplaces weigh from 4.5 kg (Sonnet) to 16 kg (Onyx 1200 Box) packed. Each one comes with a mounting kit. Make sure the wall plugs suit your wall, and on plasterboard or a timber stud wall use fixings made for that wall and rated well above the fireplace's weight.
If the wall behind the fireplace is plasterboard, timber or anything else that heat could damage, fit a thermal insulation mat behind it. Our mat is 1000 × 400 mm. For the 1200 mm models, ask us how best to cover the full width.
Hang it level
Fix the mounting rail or brackets as the manual shows, and check them with a spirit level so the burner sits flat. A level burner keeps the fuel evenly spread and the flame even along its length.
The 1200 mm models weigh 13 to 16 kg packed, so ask someone to help you lift them onto the rail. Keep the burner empty the whole time you're fitting it.
Building it into a media wall
Jade and Hazel can be built into a recess or a media wall, with an installation depth of 90 mm. Onyx Box and Sonnet are made to hang on the wall only.
Build the surround to your manual's requirements for materials, clearances and any ventilation openings. If any part of it is plasterboard or timber, protect it with the thermal insulation mat. Not sure about your design? Send us a sketch with the measurements before you start building.
Fitting it under a TV
Warm air rises, so a TV fixed straight above the fireplace takes the heat. Give it at least the clear space above the fireplace that your manual asks for, and more if the wall allows. A shelf made of a non-combustible material between the fireplace and the TV helps turn the heat away from the screen. It's also worth checking what your TV's maker says about heat.
Before the first evening
- The fireplace is level and firmly fixed.
- The burner is seated correctly and the glass is in its holders.
- You've read the operating instructions in the manual.
Then read How do I use my fireplace safely? and 5 mistakes people make with their first bioethanol fireplace before you light it.
Need a hand planning it?
Email support@flamehaus.uk with the model you're looking at, a photo of the wall and what it's made of. We'll help you work out the fixings and the spot.